Product knowledge-Kunshan AST Optoelectronic Technology Co., Ltd

Technology and support

FAQ

HOME Product knowledge

Product knowledge

Q: What’s Zoon Level?

A: It’s means the variable time level for chart.Below is a table that show the available Zoom Levels for all parameters CO2/T...

2021-05-06
Q: What is Lps and Cfm/p?

A: Lps means liter per second per person. Cfm/p means cubic feet per minute per person.

2021-05-25
Q: What’s Hold Home function?

A: It’s a back home function, if some user set the device by mistake, and do not know how to back normal status, user can use...

2021-06-01
Q: What’s Accuracy?

A: It is describing the deviation from the real concentration or error. i.e. deviation between average reading and real ...

2021-06-01
Q: What’s the protocol for your CO2 module/module?

A: We use UART Master/Slave protocol, you can contact our sales for details.

2021-06-01
Q: Do you have Analog output for your CO2 module?

A: Yes, we have, but the standard proudct do not have Analog output function, if you want it, you can contact our sales. ...

2021-06-01
Q: How many logger can your monitor recod?

A: It is only record a few data for tracer.We have data logger monitor iCeeO2-500p, it’s can record logger by micro SD card, ...

2021-05-31
Q: What’s chart on the CO2 monitor?

A: It’s a tracer, the monitor can give out the tracer by useing history datalog.

2021-06-01
Q: What’s Good Zone on the CO2 monitor?

A: It’s a Indicator, user can set the Hi/Low border level, if the history datalog is between Hi/Low border level, it’s means ...

2021-06-01
Q: What does “Response time”means?

A: It’s a parameter for gas step change. While you put CO2 monitor from one room suddenly into another room, the CO2 monitor ...

2021-06-01
Q: Do you have ABC for CO2 monitors?

A: No, we use dual beam NDIR sensor, and the sensor drift is less than than 20ppm/year, so ABC function is not necessary for ...

2021-06-01
Q: What the different between factory calibration and end user calibration?

A: In factory, we use standard gas for calibration, end user can user natural gas to calibrate 400ppm.

2021-06-01
Q: How to calibration with natural gas?

A: First, put the monitor on the outside, wait at least 10min, nutil the CO2 reading doesn’t change. Then, pull ...

2021-06-01
Q: What is Ventilation Rate?

A: It represents how much air is introduced into the indoor space from the outside. The vent rate unit is Lps, Cfm/p.

2021-05-25

Product center

Technology and support

contact us

News Center

Copyright © 1998 - 2021 AST. All Rights Reserved.

Back to top